LEED Compliant
N0 1 Proprietary Screed
No Extra Cost

Comparison Between Diamond Poly Fibre Screed V's Traditional Sand & Cement Screed


  DIAMOND POLY FIBRE SCREED TRADITIONAL SAND CEMENT
DRYING TIMES 30mm per week (Test show 60mm per week) 1mm per day 50mm= 2 months before floor finishes can be laid.
FOOT TRAFFICKING 24 hours 7 days, screeds should not be trafficked in this time
INSTALLATION Licensed applicator, completely controlled from spec to installation. No control! Anyone can lay this type of screed
GUARANTEES 10 years Guarantee against failure including the application in accordance with BS 8204 Part 1 2003 No Guarantee's
TECHNICAL BACK UP FREE BRE drop hammer testing FREE Carbide Moisture Testing No Technical back up
STRENGTHS Over 40N/mm2 after 28 daysDepending on Mix Design Lucky to achieve 15 N/mm2 after 28 days
SHRINKAGE 0.40 Water/ cement ratio therefore, controlled shrinkage Full water content, high cement ratio means high risk of shrinkage
MIXING Controlled mixing force action mixers, as per BS 8204 Part 1 No Control even ready mix large drum mixers.
SPECIFICATIONS Full N.B.S/CSi specifications written around project guaranteed by Diamond Admixtures Architect/Designer responsible for writing specification
COST m2 SAME PRICE AS SAND CEMENT SCREEDS SAME PRICE AS SAND CEMENT SCREEDS
SYSTEMS Complete systems, primers, fillers, acoustic screeds, fibres etc.. No System, use all types of different products from different manufacturers.